Interweave Implementation Guide
0.1.0 - ci-build

Interweave Implementation Guide - Local Development build (v0.1.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the R4 profiles here.

Resource Profile: InterweavePractitionerRole - Detailed Descriptions

Active as of 2024-07-17

Definitions for the Interweave-PractitionerRole resource profile.

Guidance on how to interpret the contents of this table can be found here.

1. PractitionerRole
2. PractitionerRole.id
Must Supporttrue
3. PractitionerRole.meta
Control0..?
4. PractitionerRole.meta.versionId
Control0..?
Must Supporttrue
5. PractitionerRole.meta.lastUpdated
Control0..?
Must Supporttrue
6. PractitionerRole.meta.profile
Control0..?
Must Supporttrue
7. PractitionerRole.meta.security
Control0..?
8. PractitionerRole.meta.tag
Control0..?
SlicingThis element introduces a set of slices on PractitionerRole.meta.tag. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ system
9. PractitionerRole.meta.tag:Source
SliceNameSource
Control0..1
Must Supporttrue
10. PractitionerRole.meta.tag:Source.system
Control1..?
Fixed Valuehttps://yhcr.nhs.uk/Source
11. PractitionerRole.meta.tag:Source.code
Control1..?
Must Supporttrue
12. PractitionerRole.meta.tag:Source.display
Control1..?
Must Supporttrue
13. PractitionerRole.meta.tag:Provenance
SliceNameProvenance
Control0..1
Must Supporttrue
14. PractitionerRole.meta.tag:Provenance.system
Control1..?
Fixed Valuehttps://yhcr.nhs.uk/Provenance
15. PractitionerRole.meta.tag:Provenance.code
Control1..?
Must Supporttrue
16. PractitionerRole.meta.tag:Provenance.display
Control1..?
Must Supporttrue
17. PractitionerRole.implicitRules
18. PractitionerRole.language
19. PractitionerRole.text
20. PractitionerRole.extension
SlicingThis element introduces a set of slices on PractitionerRole.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
21. PractitionerRole.extension:serviceType
SliceNameserviceType
Control0..*
TypeExtension(ExtensionInterweaveR4ServiceType) (Extension Type: CodeableConcept)
Must Supporttrue
22. PractitionerRole.active
Control10..1
Must Supporttrue
23. PractitionerRole.period
Must Supporttrue
24. PractitionerRole.practitioner
Control10..1
Must Supporttrue
25. PractitionerRole.practitioner.reference
Control1..?
26. PractitionerRole.practitioner.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..?
27. PractitionerRole.practitioner.display
Control1..?
28. PractitionerRole.organization
Must Supporttrue
29. PractitionerRole.organization.reference
Control1..?
30. PractitionerRole.organization.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..?
31. PractitionerRole.organization.display
Control1..?
32. PractitionerRole.code
Control10..*
BindingThe codes SHOULD be taken from Care Connect SDS Job Role NameFor example codes, see PractitionerRole
Must Supporttrue
33. PractitionerRole.specialty
BindingThe codes SHOULD be taken from InterweaveUKCorePracticeSettingCodeThe codes SHOULD be taken from Practice Setting Code Value Set
Must Supporttrue
34. PractitionerRole.specialty.coding
Control0..?
35. PractitionerRole.specialty.coding.system
Control1..?
36. PractitionerRole.specialty.coding.code
Control1..?
37. PractitionerRole.specialty.coding.display
Control1..?
38. PractitionerRole.location
39. PractitionerRole.location.reference
Control1..?
40. PractitionerRole.location.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..?
41. PractitionerRole.location.display
Control0..?
42. PractitionerRole.healthcareService
Control0..0*
43. PractitionerRole.availableTime
Control0..0*
44. PractitionerRole.notAvailable
Control0..0*
45. PractitionerRole.availabilityExceptions
Control0..01
46. PractitionerRole.endpoint
Control0..0*

Guidance on how to interpret the contents of this table can be found here.

1. PractitionerRole
Definition

A specific set of Roles/Locations/specialties/services that a practitioner may perform at an organization for a period of time.

Control0..*
InvariantsDefined on this element
dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (: contained.text.empty())
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (: contained.where(('#'+id in %resource.descendants().reference).not()).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
2. PractitionerRole.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Control0..1
Typeid
Must Supporttrue
Summarytrue
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

3. PractitionerRole.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

Control0..1
TypeMeta
Summarytrue
4. PractitionerRole.meta.versionId
Definition

The version specific identifier, as it appears in the version portion of the URL. This values changes when the resource is created, updated, or deleted.

Control0..1
Typeid
Must Supporttrue
Summarytrue
Comments

The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

5. PractitionerRole.meta.lastUpdated
Definition

When the resource last changed - e.g. when the version changed.

Control0..1
Typeinstant
Must Supporttrue
Summarytrue
Comments

This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant.

6. PractitionerRole.meta.profile
Definition

A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

Control0..*
Typeuri
Must Supporttrue
Summarytrue
Comments

It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

7. PractitionerRole.meta.security
Definition

Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

Control0..*
BindingThe codes SHALL be taken from All Security Labels; other codes may be used where these codes are not suitable

Security Labels from the Healthcare Privacy and Security Classification System.

TypeCoding
Summarytrue
Comments

The security labels can be updated without changing the stated version of the resource The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

8. PractitionerRole.meta.tag
Definition

Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

Control0..*
BindingFor example codes, see Common Tags

Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones"

TypeCoding
Summarytrue
Comments

The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

SlicingThis element introduces a set of slices on PractitionerRole.meta.tag. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ system
9. PractitionerRole.meta.tag:Source
SliceNameSource
Definition

Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

Control0..1*
BindingFor example codes, see Common Tags

Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones"

TypeCoding
Must Supporttrue
Summarytrue
Comments

The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

10. PractitionerRole.meta.tag:Source.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

Control10..1
Typeuri
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

Fixed Valuehttps://yhcr.nhs.uk/Source
11. PractitionerRole.meta.tag:Source.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

Control10..1
Typecode
Must Supporttrue
Summarytrue
Requirements

Need to refer to a particular code in the system.

12. PractitionerRole.meta.tag:Source.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

Control10..1
Typestring
Must Supporttrue
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

13. PractitionerRole.meta.tag:Provenance
SliceNameProvenance
Definition

Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

Control0..1*
BindingFor example codes, see Common Tags

Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones"

TypeCoding
Must Supporttrue
Summarytrue
Comments

The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

14. PractitionerRole.meta.tag:Provenance.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

Control10..1
Typeuri
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

Fixed Valuehttps://yhcr.nhs.uk/Provenance
15. PractitionerRole.meta.tag:Provenance.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

Control10..1
Typecode
Must Supporttrue
Summarytrue
Requirements

Need to refer to a particular code in the system.

16. PractitionerRole.meta.tag:Provenance.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

Control10..1
Typestring
Must Supporttrue
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

17. PractitionerRole.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

Control0..1
Typeuri
Is Modifiertrue
Summarytrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

18. PractitionerRole.language
Definition

The base language in which the resource is written.

Control0..1
BindingThe codes SHALL be taken from Common Languages; other codes may be used where these codes are not suitable

A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

19. PractitionerRole.text
Definition

A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Control0..1 This element is affected by the following invariants: dom-1
TypeNarrative
Alternate Namesnarrative, html, xhtml, display
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

20. PractitionerRole.extension
Definition

An Extension

May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

SlicingThis element introduces a set of slices on PractitionerRole.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
21. PractitionerRole.extension:serviceType
SliceNameserviceType
Definition

Broad categorization of the service that is to be provided (e.g. cardiology). This is missing in STU3, but added in R4.

Control0..* This element is affected by the following invariants: ele-1
TypeExtension(ExtensionInterweaveR4ServiceType) (Extension Type: CodeableConcept)
Must Supporttrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() | (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
22. PractitionerRole.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Control0..*
TypeExtension
Is Modifiertrue
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

23. PractitionerRole.active
Definition

Whether this practitioner's record is in active use.

Control10..1
Typeboolean
Must Supporttrue
Summarytrue
Requirements

Need to be able to mark a practitioner record as not to be used because it was created in error.

Comments

Default is true.

If the practitioner is not in use by one organization, then it should mark the period on the PractitonerRole with an end date (even if they are active) as they may be active in another role.

Default Valuetrue
24. PractitionerRole.period
Definition

The period during which the person is authorized to act as a practitioner in these role(s) for the organization.

Control0..1
TypePeriod
Must Supporttrue
Summarytrue
Requirements

Even after the agencies is revoked, the fact that it existed must still be recorded.

25. PractitionerRole.practitioner
Definition

Practitioner that is able to provide the defined services for the organisation.

Practitioner that is able to provide the defined services for the organation.

Control10..1
TypeReference(CareConnect-Practitioner-1|Practitioner)
Must Supporttrue
Summarytrue
26. PractitionerRole.practitioner.reference
Definition

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Control10..1 This element is affected by the following invariants: ref-1
Typestring
Summarytrue
Comments

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

27. PractitionerRole.practitioner.identifier
Definition

An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..1
TypeIdentifier
Summarytrue
Comments

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

28. PractitionerRole.practitioner.display
Definition

Plain text narrative that identifies the resource in addition to the resource reference.

Control10..1
Typestring
Summarytrue
Comments

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

29. PractitionerRole.organization
Definition

The organization where the Practitioner performs the roles associated.

Control0..1
TypeReference(CareConnect-Organization-1|Organization)
Must Supporttrue
Summarytrue
30. PractitionerRole.organization.reference
Definition

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Control10..1 This element is affected by the following invariants: ref-1
Typestring
Summarytrue
Comments

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

31. PractitionerRole.organization.identifier
Definition

An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..1
TypeIdentifier
Summarytrue
Comments

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

32. PractitionerRole.organization.display
Definition

Plain text narrative that identifies the resource in addition to the resource reference.

Control10..1
Typestring
Summarytrue
Comments

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

33. PractitionerRole.code
Definition

Roles which this practitioner is authorized to perform for the organization.

Control10..*
BindingThe codes SHOULD be taken from Care Connect SDS Job Role NameFor example codes, see PractitionerRole
TypeCodeableConcept
Must Supporttrue
Summarytrue
Requirements

Need to know what authority the practitioner has - what can they do?

Comments

A person may have more than one role. At least one role is required.

SlicingThis element introduces a set of slices on PractitionerRole.code. The slices are unordered and Open at End, and can be differentiated using the following discriminators:
  • value @ coding.system
34. PractitionerRole.code:sdsJobRoleName
SliceNamesdsJobRoleName
Definition

Roles which this practitioner is authorized to perform for the organization.

Control0..1*
BindingThe codes SHALL be taken from Care Connect SDS Job Role NameFor example codes, see PractitionerRole
TypeCodeableConcept
Summarytrue
Requirements

Need to know what authority the practitioner has - what can they do?

Comments

A person may have more than one role. At least one role is required.

35. PractitionerRole.code:sdsJobRoleName.coding
Definition

A reference to a code defined by a terminology system.

Control10..1*
TypeCoding
Summarytrue
Requirements

Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.

Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

36. PractitionerRole.code:sdsJobRoleName.coding.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

Control10..1
Typeuri
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

Fixed Valuehttps://fhir.hl7.org.uk/STU3/CodeSystem/CareConnect-SDSJobRoleName-1
37. PractitionerRole.code:sdsJobRoleName.coding.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

Control10..1
Typecode
Summarytrue
Requirements

Need to refer to a particular code in the system.

38. PractitionerRole.code:sdsJobRoleName.coding.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

Control10..1
Typestring
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

39. PractitionerRole.specialty
Definition

Specific specialty of the practitioner.

Control0..*
BindingThe codes SHOULD be taken from InterweaveUKCorePracticeSettingCodeThe codes SHOULD be taken from Practice Setting Code Value Set
TypeCodeableConcept
Must Supporttrue
Summarytrue
40. PractitionerRole.location
Definition

The location(s) at which this practitioner provides care.

Control0..*
TypeReference(CareConnect-Location-1|Location)
Summarytrue
41. PractitionerRole.location.reference
Definition

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Control10..1 This element is affected by the following invariants: ref-1
Typestring
Summarytrue
Comments

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

42. PractitionerRole.location.identifier
Definition

An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..1
TypeIdentifier
Summarytrue
Comments

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

43. PractitionerRole.location.display
Definition

Plain text narrative that identifies the resource in addition to the resource reference.

Control0..1
Typestring
Summarytrue
Comments

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

44. PractitionerRole.healthcareService
Definition

The list of healthcare services that this worker provides for this role's Organization/Location(s).

Control0..0*
TypeReference(HealthcareService)
45. PractitionerRole.availableTime
Definition

A collection of times that the Service Site is available.

Control0..0*
TypeBackboneElement
Comments

More detailed availability information may be provided in associated Schedule/Slot resources.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() | (children().count() > id.count()))
46. PractitionerRole.notAvailable
Definition

The HealthcareService is not available during this period of time due to the provided reason.

Control0..0*
TypeBackboneElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() | (children().count() > id.count()))
47. PractitionerRole.availabilityExceptions
Definition

A description of site availability exceptions, e.g. public holiday availability. Succinctly describing all possible exceptions to normal site availability as details in the available Times and not available Times.

Control0..01
Typestring
48. PractitionerRole.endpoint
Definition

Technical endpoints providing access to services operated for the practitioner with this role.

Control0..0*
TypeReference(Endpoint)
Requirements

Organizations have multiple systems that provide various services and ,ay also be different for practitioners too.

So the endpoint satisfies the need to be able to define the technical connection details for how to connect to them, and for what purpose.

Guidance on how to interpret the contents of this table can be found here.

1. PractitionerRole
Definition

A specific set of Roles/Locations/specialties/services that a practitioner may perform at an organization for a period of time.

Control0..*
2. PractitionerRole.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Control0..1
Typeid
Must Supporttrue
Summarytrue
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

3. PractitionerRole.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

Control0..1
TypeMeta
Summarytrue
4. PractitionerRole.meta.id
Definition

unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
5. PractitionerRole.meta.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

SlicingThis element introduces a set of slices on PractitionerRole.meta.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
6. PractitionerRole.meta.versionId
Definition

The version specific identifier, as it appears in the version portion of the URL. This values changes when the resource is created, updated, or deleted.

Control0..1
Typeid
Must Supporttrue
Summarytrue
Comments

The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

7. PractitionerRole.meta.lastUpdated
Definition

When the resource last changed - e.g. when the version changed.

Control0..1
Typeinstant
Must Supporttrue
Summarytrue
Comments

This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant.

8. PractitionerRole.meta.profile
Definition

A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

Control0..*
Typeuri
Must Supporttrue
Summarytrue
Comments

It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

9. PractitionerRole.meta.security
Definition

Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

Control0..*
BindingThe codes SHALL be taken from All Security Labels; other codes may be used where these codes are not suitable Security Labels from the Healthcare Privacy and Security Classification System
TypeCoding
Summarytrue
Comments

The security labels can be updated without changing the stated version of the resource The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

10. PractitionerRole.meta.tag
Definition

Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

Control0..*
BindingFor example codes, see Common Tags Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones
TypeCoding
Summarytrue
Comments

The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

SlicingThis element introduces a set of slices on PractitionerRole.meta.tag. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ system
11. PractitionerRole.meta.tag:Source
SliceNameSource
Definition

Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

Control0..1
BindingFor example codes, see Common Tags Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones
TypeCoding
Must Supporttrue
Summarytrue
Comments

The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

12. PractitionerRole.meta.tag:Source.id
Definition

unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
13. PractitionerRole.meta.tag:Source.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

SlicingThis element introduces a set of slices on PractitionerRole.meta.tag.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
14. PractitionerRole.meta.tag:Source.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

Control1..1
Typeuri
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

Fixed Valuehttps://yhcr.nhs.uk/Source
15. PractitionerRole.meta.tag:Source.version
Definition

The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

NoteThis is a business versionId, not a resource version id (see discussion)
Control0..1
Typestring
Summarytrue
Comments

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

16. PractitionerRole.meta.tag:Source.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

Control1..1
Typecode
Must Supporttrue
Summarytrue
Requirements

Need to refer to a particular code in the system.

17. PractitionerRole.meta.tag:Source.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

Control1..1
Typestring
Must Supporttrue
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

18. PractitionerRole.meta.tag:Source.userSelected
Definition

Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

Control0..1
Typeboolean
Summarytrue
Requirements

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Comments

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

19. PractitionerRole.meta.tag:Provenance
SliceNameProvenance
Definition

Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

Control0..1
BindingFor example codes, see Common Tags Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones
TypeCoding
Must Supporttrue
Summarytrue
Comments

The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

20. PractitionerRole.meta.tag:Provenance.id
Definition

unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
21. PractitionerRole.meta.tag:Provenance.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

SlicingThis element introduces a set of slices on PractitionerRole.meta.tag.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
22. PractitionerRole.meta.tag:Provenance.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

Control1..1
Typeuri
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

Fixed Valuehttps://yhcr.nhs.uk/Provenance
23. PractitionerRole.meta.tag:Provenance.version
Definition

The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

NoteThis is a business versionId, not a resource version id (see discussion)
Control0..1
Typestring
Summarytrue
Comments

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

24. PractitionerRole.meta.tag:Provenance.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

Control1..1
Typecode
Must Supporttrue
Summarytrue
Requirements

Need to refer to a particular code in the system.

25. PractitionerRole.meta.tag:Provenance.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

Control1..1
Typestring
Must Supporttrue
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

26. PractitionerRole.meta.tag:Provenance.userSelected
Definition

Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

Control0..1
Typeboolean
Summarytrue
Requirements

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Comments

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

27. PractitionerRole.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

Control0..1
Typeuri
Is Modifiertrue
Summarytrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

28. PractitionerRole.language
Definition

The base language in which the resource is written.

Control0..1
BindingThe codes SHALL be taken from Common Languages; other codes may be used where these codes are not suitable A human language
Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

29. PractitionerRole.text
Definition

A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Control0..1 This element is affected by the following invariants: dom-1
TypeNarrative
Alternate Namesnarrative, html, xhtml, display
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

30. PractitionerRole.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Control0..*
TypeResource
Alternate Namesinline resources, anonymous resources, contained resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

31. PractitionerRole.extension
Definition

An Extension

Control0..*
TypeExtension
SlicingThis element introduces a set of slices on PractitionerRole.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
32. PractitionerRole.extension:serviceType
SliceNameserviceType
Definition

Broad categorization of the service that is to be provided (e.g. cardiology). This is missing in STU3, but added in R4.

Control0..* This element is affected by the following invariants: ele-1
TypeExtension(ExtensionInterweaveR4ServiceType) (Extension Type: CodeableConcept)
Must Supporttrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() | (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
33. PractitionerRole.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Control0..*
TypeExtension
Is Modifiertrue
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

34. PractitionerRole.identifier
Definition

Business Identifiers that are specific to a role/location.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Summarytrue
Requirements

Often, specific identities are assigned for the agent.

35. PractitionerRole.identifier.id
Definition

unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
36. PractitionerRole.identifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

SlicingThis element introduces a set of slices on PractitionerRole.identifier.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
37. PractitionerRole.identifier.use
Definition

The purpose of this identifier.

Control0..1
BindingThe codes SHALL be taken from IdentifierUse Identifies the purpose for this identifier, if known
Typecode
Is Modifiertrue
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Comments

This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

38. PractitionerRole.identifier.type
Definition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

Control0..1
BindingThe codes SHALL be taken from Identifier Type Codes; other codes may be used where these codes are not suitable A coded type for an identifier that can be used to determine which identifier to use for a specific purpose
TypeCodeableConcept
Summarytrue
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage.

Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

39. PractitionerRole.identifier.system
Definition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

Control1..1
Typeuri
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Example
General:http://www.acme.com/identifiers/patient
40. PractitionerRole.identifier.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

Control1..1
Typestring
Summarytrue
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension.

Example
General:123456
41. PractitionerRole.identifier.period
Definition

Time period during which identifier is/was valid for use.

Control0..1
TypePeriod
Summarytrue
42. PractitionerRole.identifier.assigner
Definition

Organization that issued/manages the identifier.

Control0..1
TypeReference(CareConnect-Organization-1)
Summarytrue
Comments

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

43. PractitionerRole.active
Definition

Whether this practitioner's record is in active use.

Control1..1
Typeboolean
Must Supporttrue
Summarytrue
Requirements

Need to be able to mark a practitioner record as not to be used because it was created in error.

Comments

Default is true.

If the practitioner is not in use by one organization, then it should mark the period on the PractitonerRole with an end date (even if they are active) as they may be active in another role.

Default Valuetrue
44. PractitionerRole.period
Definition

The period during which the person is authorized to act as a practitioner in these role(s) for the organization.

Control0..1
TypePeriod
Must Supporttrue
Summarytrue
Requirements

Even after the agencies is revoked, the fact that it existed must still be recorded.

45. PractitionerRole.practitioner
Definition

Practitioner that is able to provide the defined services for the organisation.

Control1..1
TypeReference(CareConnect-Practitioner-1)
Must Supporttrue
Summarytrue
46. PractitionerRole.practitioner.id
Definition

unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
47. PractitionerRole.practitioner.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

SlicingThis element introduces a set of slices on PractitionerRole.practitioner.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
48. PractitionerRole.practitioner.reference
Definition

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Control1..1 This element is affected by the following invariants: ref-1
Typestring
Summarytrue
Comments

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

49. PractitionerRole.practitioner.identifier
Definition

An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..1
TypeIdentifier
Summarytrue
Comments

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

50. PractitionerRole.practitioner.display
Definition

Plain text narrative that identifies the resource in addition to the resource reference.

Control1..1
Typestring
Summarytrue
Comments

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

51. PractitionerRole.organization
Definition

The organization where the Practitioner performs the roles associated.

Control0..1
TypeReference(CareConnect-Organization-1)
Must Supporttrue
Summarytrue
52. PractitionerRole.organization.id
Definition

unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
53. PractitionerRole.organization.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

SlicingThis element introduces a set of slices on PractitionerRole.organization.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
54. PractitionerRole.organization.reference
Definition

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Control1..1 This element is affected by the following invariants: ref-1
Typestring
Summarytrue
Comments

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

55. PractitionerRole.organization.identifier
Definition

An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..1
TypeIdentifier
Summarytrue
Comments

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

56. PractitionerRole.organization.display
Definition

Plain text narrative that identifies the resource in addition to the resource reference.

Control1..1
Typestring
Summarytrue
Comments

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

57. PractitionerRole.code
Definition

Roles which this practitioner is authorized to perform for the organization.

Control1..*
BindingThe codes SHOULD be taken from Care Connect SDS Job Role Name
TypeCodeableConcept
Must Supporttrue
Summarytrue
Requirements

Need to know what authority the practitioner has - what can they do?

Comments

A person may have more than one role. At least one role is required.

SlicingThis element introduces a set of slices on PractitionerRole.code. The slices are unordered and Open at End, and can be differentiated using the following discriminators:
  • value @ coding.system
58. PractitionerRole.code:sdsJobRoleName
SliceNamesdsJobRoleName
Definition

Roles which this practitioner is authorized to perform for the organization.

Control0..1
BindingThe codes SHALL be taken from Care Connect SDS Job Role Name
TypeCodeableConcept
Summarytrue
Requirements

Need to know what authority the practitioner has - what can they do?

Comments

A person may have more than one role. At least one role is required.

59. PractitionerRole.code:sdsJobRoleName.id
Definition

unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
60. PractitionerRole.code:sdsJobRoleName.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

SlicingThis element introduces a set of slices on PractitionerRole.code.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
61. PractitionerRole.code:sdsJobRoleName.coding
Definition

A reference to a code defined by a terminology system.

Control1..1
TypeCoding
Summarytrue
Requirements

Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.

Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

62. PractitionerRole.code:sdsJobRoleName.coding.id
Definition

unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
63. PractitionerRole.code:sdsJobRoleName.coding.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

SlicingThis element introduces a set of slices on PractitionerRole.code.coding.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
64. PractitionerRole.code:sdsJobRoleName.coding.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

Control1..1
Typeuri
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

Fixed Valuehttps://fhir.hl7.org.uk/STU3/CodeSystem/CareConnect-SDSJobRoleName-1
65. PractitionerRole.code:sdsJobRoleName.coding.version
Definition

The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

NoteThis is a business versionId, not a resource version id (see discussion)
Control0..1
Typestring
Summarytrue
Comments

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

66. PractitionerRole.code:sdsJobRoleName.coding.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

Control1..1
Typecode
Summarytrue
Requirements

Need to refer to a particular code in the system.

67. PractitionerRole.code:sdsJobRoleName.coding.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

Control1..1
Typestring
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

68. PractitionerRole.code:sdsJobRoleName.coding.userSelected
Definition

Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

Control0..1
Typeboolean
Summarytrue
Requirements

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Comments

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

69. PractitionerRole.code:sdsJobRoleName.text
Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

Control0..1
Typestring
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Comments

Very often the text is the same as a displayName of one of the codings.

70. PractitionerRole.specialty
Definition

Specific specialty of the practitioner.

Control0..*
BindingThe codes SHOULD be taken from InterweaveUKCorePracticeSettingCode
TypeCodeableConcept
Must Supporttrue
Summarytrue
71. PractitionerRole.specialty.id
Definition

unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
72. PractitionerRole.specialty.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

SlicingThis element introduces a set of slices on PractitionerRole.specialty.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
73. PractitionerRole.specialty.coding
Definition

A reference to a code defined by a terminology system.

Control0..*
TypeCoding
Summarytrue
Requirements

Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.

Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

74. PractitionerRole.specialty.coding.id
Definition

unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
75. PractitionerRole.specialty.coding.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

SlicingThis element introduces a set of slices on PractitionerRole.specialty.coding.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
76. PractitionerRole.specialty.coding.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

Control1..1
Typeuri
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

77. PractitionerRole.specialty.coding.version
Definition

The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

NoteThis is a business versionId, not a resource version id (see discussion)
Control0..1
Typestring
Summarytrue
Comments

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

78. PractitionerRole.specialty.coding.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

Control1..1
Typecode
Summarytrue
Requirements

Need to refer to a particular code in the system.

79. PractitionerRole.specialty.coding.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

Control1..1
Typestring
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

80. PractitionerRole.specialty.coding.userSelected
Definition

Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

Control0..1
Typeboolean
Summarytrue
Requirements

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Comments

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

81. PractitionerRole.specialty.text
Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

Control0..1
Typestring
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Comments

Very often the text is the same as a displayName of one of the codings.

82. PractitionerRole.location
Definition

The location(s) at which this practitioner provides care.

Control0..*
TypeReference(CareConnect-Location-1)
Summarytrue
83. PractitionerRole.location.id
Definition

unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
84. PractitionerRole.location.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

SlicingThis element introduces a set of slices on PractitionerRole.location.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
85. PractitionerRole.location.reference
Definition

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Control1..1 This element is affected by the following invariants: ref-1
Typestring
Summarytrue
Comments

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

86. PractitionerRole.location.identifier
Definition

An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..1
TypeIdentifier
Summarytrue
Comments

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

87. PractitionerRole.location.display
Definition

Plain text narrative that identifies the resource in addition to the resource reference.

Control0..1
Typestring
Summarytrue
Comments

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

88. PractitionerRole.healthcareService
Definition

The list of healthcare services that this worker provides for this role's Organization/Location(s).

Control0..0
TypeReference(HealthcareService)
89. PractitionerRole.telecom
Definition

Contact details that are specific to the role/location/service.

Control0..*
TypeContactPoint
Summarytrue
Requirements

Often practitioners have a dedicated line for each location (or service) that they work at, and need to be able to define separate contact details for each of these.

90. PractitionerRole.availableTime
Definition

A collection of times that the Service Site is available.

Control0..0
TypeBackboneElement
Comments

More detailed availability information may be provided in associated Schedule/Slot resources.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() | (children().count() > id.count()))
91. PractitionerRole.notAvailable
Definition

The HealthcareService is not available during this period of time due to the provided reason.

Control0..0
TypeBackboneElement
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() | (children().count() > id.count()))
92. PractitionerRole.availabilityExceptions
Definition

A description of site availability exceptions, e.g. public holiday availability. Succinctly describing all possible exceptions to normal site availability as details in the available Times and not available Times.

Control0..0
Typestring
93. PractitionerRole.endpoint
Definition

Technical endpoints providing access to services operated for the practitioner with this role.

Control0..0
TypeReference(Endpoint)
Requirements

Organizations have multiple systems that provide various services and ,ay also be different for practitioners too.

So the endpoint satisfies the need to be able to define the technical connection details for how to connect to them, and for what purpose.